Hardware · FastShot 360° · At the rig

The whole core.Wherever you are.

Drill core logging at the rig. Both faces of the fresh core, stitched into one seamless cylinder before it is boxed.

Request a quote

The cart

A cart thatrides the core.

About 12 kg and portable: a cart of approx. 20 × 97 × 66 cm on a 3 m L-profile. The drill crew runs it, with no outside staff.

~12kgportable, run by the drill crew
20Vtool battery, quick to swap

The capture

Roll.Shoot.

The cart rolls along the fresh core and the camera looks straight down. Up to 4 shots per face, fewer on shorter runs.

4shots per face, at most
6500KLED light on board, day or night

The other face

Turn it180°.

Half a turn in the profile and the other face is up. The orientation line is drawn at capture, with no ruler.

The other face

Then theother side.

Roll back and shoot again. About 3 minutes per core, both faces included.

~3minper core, both faces
360°full core coverage

The result

Two faces.One seamless core.

Stitched in the cloud. Every run is logged with its hole ID and depth, before the core is boxed.

01 · The problem

The core starts breaking the moment it leaves the hole.

  • Split to fit the boxesOriginal geometry is gone.
  • Depth blocks placed by eyeErrors no one can recover later.
  • Orientation drawn with a rulerSlow and imprecise.
  • Logged on broken core, days laterDecisions wait for the boxes.

What is lost at the rig can never be recovered.

Boxed drill core with depth and orientation lines drawn by hand
Depth written by handOrientation drawn by hand

02 · How it works

Your process stays the same. FastShot 360° adds value on top.

Drillers and geologists keep working the way they do today: same steps, same core boxes, same logging.

  1. As todayCore out of the barrel
  2. + Added valueFastShot 360° capture
  3. As todayBoxing
  4. As todayLogging

Hold the core in your hands

Drag to spin it. Zoom in on the details.

A real capture from a field run, both faces, as one cylinder.

FastShot 360° runs shown by depth in the software
Every run by depth, in the original software interface.

On your screen, the same day

Digitized before the core is boxed.

Every run is logged with its hole ID and depth.

  • Auditable by designFix logging errors and verify the work, now or later.
  • Depth reconciledReconciled before boxing, no eyeballing.
  • Both sides of the coreSeeing the other side reveals new veins and fractures.
  • Real-time decisionsPrioritise holes and targets the same day.
  • More eyes, fewer errorsShare the drilling work with base.
  • Less risk and costLower risk by deciding with more precise images.

04 · Already in the field

Already used on US drilling projects.

FastShot 360° is already in use at mining projects in Alaska, alongside the geology teams that log the core every day.

Where
Alaska, USA
On site
At the rig and in the core shack
Result
Core barrel to 3D twin, in minutes

05 · FAQ

What people ask us at the rig.

Who operates it? Is outside staff needed?

The drilling team itself, with no outside staff. It is light and easy to use, so no prior training is needed. It sits at the drill site, before boxing: same boxes, same logging. A capture takes about 3 minutes per core, both faces included.

How is it different from a televiewer and other core scanners?

Unlike other scans, it sits at the drill site, before the core is boxed, and it is light and easy to use, with no prior training. A televiewer is costly and goes down the hole with its own risk; core scanners are fixed equipment that work on core already boxed. FastShot 360° complements them, it does not replace them.

What about daylight or night?

The cart carries its own adjustable 6500 K LED lighting and is covered on the sides to control the light, so the image is standardised in any condition, day or night.

How are depth and orientation kept?

The orientation line is drawn at capture, with no ruler. Depth is reconciled at the rig, before boxing, with no eyeballing, and each run is logged with its hole ID and depth.

How big is it and how is it powered?

About 12 kg and portable: a cart of approx. 20 × 97 × 66 cm on a 3 m L-profile. It runs on a 20 V tool battery, chosen so it can be swapped quickly and easily if it runs out mid-service. The camera has its own independent 6800 mAh battery, 6.5× the capacity of a standard camera battery. Built for harsh environments.

Want to try it on your next hole?

Tell us about your drilling program and we'll get back to you.